Skip to main content

Capabilities

Presses, molds and finishing for steel backing plates

A 3,000 m² facility with three production lines and a stated capacity of 1,000,000 pieces per month.

Equipment

What is on the floor

Press tonnage from 16 to 200 tons, plus automatic punching, chamfering, deburring and shot blasting.

2
Hydraulic presses
200 ton
5
High-precision presses
160 ton
10
Presses
16 / 40 / 80 / 125 / 160 ton
2
Automatic punching systems
1
Automatic chamfering system
2
Deburring machines
1
Shot-blasting machine
1,000+
Backing-plate molds
Existing tooling library

Facility layout

Six working areas across three lines

  • 01Automatic blanking
  • 02Mold
  • 03Packaging
  • 04Shot blasting
  • 05Quality inspection
  • 06Finished goods

Process

Follow a plate through the plant

  1. Entrance of Building 24 with a brass nameplate, opening onto a press hall with a forklift and baskets of stamped plates
    Facility entrance, Building 24 · Representative facility photography

    Step 01

    One 3,000 m² facility, three production lines

    Building 24 at Yida Science and Innovation City holds three production lines, with separate areas for automatic blanking, molds, packaging, shot blasting, quality inspection and finished goods.

  2. Automatic feeding rails carrying a large steel sheet into a press for blanking
    Automatic blanking line · Representative facility photography

    Step 02

    Automatic blanking from sheet steel

    Steel sheet is fed to the press on an automatic blanking line, cutting plate outlines in a repeatable first operation.

  3. Press hall with a red hydraulic shear in the foreground, a green feeding frame and a press behind it
    Press hall · Representative facility photography

    Step 03

    Hydraulic and high-precision presses

    Two 200-ton hydraulic presses and five 160-ton high-precision presses sit alongside ten presses across 16, 40, 80, 125 and 160 tons, so tonnage can follow the part.

  4. Blanked backing plates travelling on a patterned belt through a deburring machine
    Deburring machine · Representative facility photography

    Step 04

    Deburring before the next operation

    Two deburring machines clean blanked edges. Plates run across the belt and leave ready for hole and edge operations.

  5. Close view of automatic processing equipment with a servo motor, cylinders and guide rails
    Automatic processing equipment · Representative facility photography

    Step 05

    Automatic punching and chamfering

    Two automatic punching systems and one automatic chamfering system handle hole and edge operations without hand feeding each plate.

  6. Wire basket holding finished backing plates beside a finishing machine
    Finishing and handling · Representative facility photography

    Step 06

    Shot blasting and finished goods

    One shot-blasting machine prepares the surface. Finished plates move in baskets toward quality inspection, packaging and the finished-goods area.

Tooling and OEM/ODM

Drawing-based development

  1. 01

    Drawing or sample review

    Send a drawing, a sample or a reference number. Outline, hole layout and material are confirmed before tooling starts.

  2. 02

    Mold development

    Tooling is developed from your drawing, supported by an existing library of more than 1,000 backing-plate molds.

  3. 03

    Sampling

    Sample plates are produced from the new mold so fit and dimensions can be reviewed before production.

  4. 04

    OEM / ODM production

    Approved parts move to repeat production on the three production lines, then to packaging and the finished-goods area.

Factory evidence

All supplied non-sensitive factory photographs are retained here as individual evidence views.

  • Yuanjing production facility view 1

    Facility view 01

  • Yuanjing production facility view 2

    Facility view 02

  • Yuanjing production facility view 3

    Facility view 03

  • Yuanjing production facility view 4

    Facility view 04

  • Yuanjing production facility view 5

    Facility view 05

  • Yuanjing production facility view 6

    Facility view 06

  • Yuanjing production facility view 7

    Facility view 07

  • Yuanjing production facility view 8

    Facility view 08

  • Yuanjing production facility view 9

    Facility view 09

  • Yuanjing production facility view 10

    Facility view 10

  • Yuanjing production facility view 11

    Facility view 11

  • Yuanjing production facility view 12

    Facility view 12

  • Yuanjing production facility view 13

    Facility view 13

  • Yuanjing production facility view 14

    Facility view 14

  • Yuanjing production facility view 15

    Facility view 15

  • Yuanjing production facility view 16

    Facility view 16

  • Yuanjing production facility view 17

    Facility view 17

  • Yuanjing production facility view 18

    Facility view 18

  • Yuanjing production facility view 19

    Facility view 19

  • Yuanjing production facility view 20

    Facility view 20

  • Yuanjing production facility view 21

    Facility view 21

  • Yuanjing production facility view 22

    Facility view 22

  • Yuanjing production facility view 23

    Facility view 23

Questions

Before you request a quote

What is the minimum order quantity?

Most listed models start at 200 pcs. D1044-7947 is quoted per request, so tell us the quantity you expect and we will confirm it in the quote.

How long does production take?

Lead time is typically 15–25 days, depending on quantity and process. The date that applies to your order is confirmed in the quote.

Can you make a plate that is not listed?

Yes. We support drawing-based mold development, sampling and OEM/ODM production, and also manufacture custom metal stamping parts.

Which reference numbers can I search by?

Each model lists its FMSI number and, where applicable, OE, WVA and TRW references. If you only have a vehicle or a sample, send it and we will match it.

Can I request inspection reports?

Yes. Tell us which dimensions or documents you need when you request a quote or a sample, and we will confirm what can be provided.

Have a drawing or a sample?

Share it and tell us the quantity you expect.